MINI 13 Printable Jointed Figure Frame - Presupported

I had issues printing the frame of Mini 13 with no supports, so I remixed it with some simple supports built in. Inspired by this for Lucky 13 by basti30:

https://www.printables.com/model/154760-lucky13-easy-print-without-brim

Printed with PLA and suggested settings from original Mini 13 frame.

• Layer height 0.15mm (first layer 0.2mm)
• 3 perimeters
• 30% rectilinear infill
• Slow down the first layer print speed (30% of default)
• 0.25mm elephant foot compensation
• Print external perimeters first
• No brim or support material