Stokke Tripp Trapp Toy hanger

My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one. Because it is too large to fit on the printbed I bend the model untill it fit the build volume. Afterwards I heated it in the oven to deploy it.

NOTE: It only fits the older version of the newborn seat of Tripp Trapp, so check the photos if your seat looks similar.

It is one single part but I added the base clip also as a separate model so you can combine it with a hook or whatever you want.

Don't use it to sell it since the original isn't even expensive. Its just a nice thing to show what a printer can do ;)

Print instructions

For slicing in PrusaSlicer you need to scale it to 99.99% otherwise it will not slice.

Print with PETG since PLA will break and leave sharp objects.
Print with many perimeters.
Print solid (100% infill)
Heat in the oven at 110 deg C untill its is bendable. (10 mins for me)
Bend in the wished shape.
Be carefull to not deform the clip on the bottom.

Printed on a Mk3s.