Settlers of Catan for StageTop PlayTiles

The original board pieces are numbered in a sans font using a .2mm cutout starting with the upper left section.

The expansion board is numbered in a serif font using a .2mm cutout, also stating with the upper left section. 

Bonus half sized PlayTiles for the edges and corners! There are three different piece holder versions remixed from other designers, one resource card holder, and a hexagon shaped box to hold loose pieces!

A request was made for Catan PlayTiles with 4.5mm hex holders, as many 3D printed hexes are available in this size. This request has been finished!

A second request was made for cutouts for the roads. This request has been finished!

A third request was made for ¾ tiles and component dishes on the corner tiles. This request has been finished!

I've tested the original board. It works! All other boards are built off of the original, so they should be all good!