April 21, 2023
Description
A coworker gave me the idea a while back and I finally made it real.
It works, it is loud. Use at your own discretion. For best results try 75-90PSI, much over that it overloads the whistle and gets quieter again.
Printed at 0.25mm layer with a 0.4mm nozzle. The round base goes down for proper print orientation. Updated the model to reflect the correct print orientation. Use PLA or PETG.
See my Quad-Tone version here.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Smileynulk
