Dukedoks Cramer Truggy RC 4x4 horizontal stand

Horizontal stand for the Dukedoks Cramer Truggy, ideal for servicing such as differential repair or for display/storage. The car is held in place by holes for the chassis screws and by cut-outs for bumpers.

You will need some M3x16 (anything between 12 and 18 will do) and M3x10 screws.

Variants

There are three possible variants:

• Lite – support for body only 
  • 8 pcs of M3x16
• Display – support for body and both axles
  • 12 pcs of M3x16
• Full – support for body and both axles, strengthened (recommended)
  • 16 pcs of M3x16
  • 4 pcs of M3x10 (these are highlighted in a third picture)

Pro tip

Put rubber feet on the bottom for better grip.