Say hello to Sparky the adorable robot! A cute little friend that can keep you company while you work. Make Sparky your own by printing him in any colour you like!
Instructions
Printing should be pretty easy. I recommend using a small layer height, to preserve the finer detail/curves in this small sized model. Most parts will print without supports, but should be used for: Head (Front), Body (Front), and Head (Back).
Brims are strongly recommended for all of the head and body detail parts. The surfaces with brims will all be hidden when the model is assembled.
Keep an eye on the direction of the Head Plate when assembling the model. The holes for the antenna parts should be towards the backside of the model.
Also keep an eye on the direction of the Body Plateand its buttons. The plate has a curve which should match the curve of the body when assembled. The buttons in the plate also come in two different heights so that they can match the body curve.
The 8mm Button and 10mm Button on the body detail also have a curve to match the body, so make sure you line up those buttons in the correct direction as well.
You will need to print two copies of the Antenna, and Side Ridge parts
LJ Prints
