Little Cities - Fun Fair

Update - 06/11/20.
Green to brown to green STL file (Trees) were missing. This has now been uploaded and is ready for download. Sorry for the inconvenience.

Little Cities is a 3D Printable toy series where miniature buildings and vehicles are stored within a purpose designed case until ready for play. Once play begins simply unfold the case and attach the miniature buildings to the outside of the case to create a mini play set. Each case will be themed with mini vehicles to print as well. The cases can also interlock so you can expand your little cities playset as I develop and release new Little City themed cases.

This one is the Fun Fair!!!
Go take a look at the attractions and find yourself mesmerized by the big wheel as it spins. Finding yourself a little parched, then go visit the Ice Cream van. The Fun Fair is colorful and joyful and a great addition to the Little City collection.

Please check out and follow my profile page to see what Little Cities have already been released.

Note - This is not a MMU print. Simply print the parts in the appropriate colours and glue them together.
Also I apologize, there are allot of parts required for this one. Sorry. :-(

As this is part of a series I will design other themed cities, the bonus being is the cases will interlock, thus creating a bigger play-set. The roads will run in sync too. At this point I have about 26 little cities planned.

Please note some of the parts may cause a choking hazard, so these 3D printed toys are not recommend for children under the age of 6.

If you are interested in early releases and exclusive designs please check out my Patreon.

https://www.patreon.com/neil3dprints

If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.

https://www.instagram.com/neil3dprints/?hl=en

Print instructions

This is not a MMU print. Simply print the parts and assemble them together.

Please refer to the images for assembly instructions.

The case I printed at 0.2mm layer height and 0.15mm for all other parts.
Refer to the file names to see if colour changes (CC) are required and for what layer heights to apply the colour changes.

The vehicle wheels print in one. Be patient and gentle to loosen them so they can turn. Also use a little glue to attach the transit van together while ensuring the wheels still turn.

Any questions or queries just send me a message and I will get back to you when I can.

If you are interested in early releases and exclusive designs please check out my Patreon.

https://www.patreon.com/neil3dprints

If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.

https://www.instagram.com/neil3dprints/?hl=en