April 9, 2023
Description
25 x 25 hole board for pegs for little fingers.
Board printed in PLA, 0.2mm layer height, 10% infill (I chose Gyroid because I love it!) No supports. Skirt adhesion
Pegs printed in PLA. 15 Walls and 100% concentric infill for maximum strength - I guess I could have stuck to my usual 3 walls and just had 100% concentric infill!. I used supports on the peg to keep the hole nice!
The board is 190mm x 190mm x 15mm. The holes are 10.75mm diameter and 12mm deep.
The pegs are 30mm diameter with the top being 10mm high and the leg is 10.5mm diameter and 15mm long
License:
Creative Commons — Attribution
Remrafs
