Trickerion CE Card Holders

These are some cardholders for the boardgame Trickerion Collector Edition.

They are intended to fit into the top empty space of the box.

Print one of each either with supports, bridging, or both. After the print just clip off the small feet on the bottom. Then the cardholders will slip nicely onto the top of the board.

I used rather thin and tight-fitting sleeves and doubt it will work with any premium or larger ones.

Let me know if you have any comments or questions.

Print instructions

Printer Brand: Creality

Printer: CR-10S

Rafts: No

Supports: Yes

Resolution: 0.6

Notes:

Used a 0.8mm nozzle