MINI 13: Star Wars AT-RT

I started looking at other Star Wars vehicles after making the AT-ST and I've identified a few that I think would be great for Mini 13. Today, I have my version of an AT-RT that is perfect for your Stormtroopers to ride. This remix is the AT-RT only. If you want the Stormtrooper pictured, see the links below.
 

I highly suggest downloading @egz fantastic Mini 13 Stormtrooper and Mini 13 Vader skins to ride your new AT-RT.

Support free, woo hoo!
 

Something that I haven't been too concerned about is creating support free designs as most of what I make is Mini 13 related and any supports are usually minimal. Having said that, I realize support free designs are important to a lot of people, so going forward I will do my best to keep everything support free, starting with this design.

On top of downloading my files, you will need to download some of the Mini 13 frame parts. Below is a list of the frame parts and the amount you will need as well as a direct download link for them. 

You will need to print the following pieces at 200%

mini13-frame-head.stl  x1
mini13-frame-waist.stl  x1
mini13-frame-leg.stl  x6
mini13-frame-foot.stl  x2
 

ASSEMBLY:

Assembly is very easy and only takes a minute. Start by grabbing a Foot Rest 1 and Foot Rest 2 piece.

Fit Foot Rest 1 into Foot Rest 2 as seen below.

And then fit Foot Rest 2 into the main body. Repeat the steps for the other side.

Next, grab a Handle 1 part and the Handle 2 part.

Fit a Handle 1 part over one end of the Handle 2 part.

Slide Handle 2 through the main body as seen below and then fit the other Handle 1 part over the other end of Handle 2. 

Grab Gun 1 and Gun 2 parts

Fit Gun 1 into the main body as seen below.

Gun 2 connects to Gun 1 via a standard ball and socket.

The antenna fits into the two small holes at the back of the main body.