Insert / Organizer for Golem

My contribution for an insert for 'Golem' published by Cranio Creations.

I uploaded the files as STL and as 3mf. I recommend using the 3mf file as they are already pre-cut and should make slicing conditions easier.
But - especially for Cura users - if you don't want to change your settings, you may find the stl's file easier to handle.

!There is also a pdf-file in the download section where you can print pages 2 and 3 to put into the box as storage guidelines. Further pages provide instructions for printing as well.

As for other inserts I create I aim for the following (in priority order):
* Enhance setup and tear-down part
Take everything needed out of the box and arrange it around the different boards. Some trays - where required - contain added information for the setup.

* No need for covers of boxes but designed for horizontal and vertical storage

* Opted to store sleeved cards (not a requirement for this insert)
I used DocsMagic Standard Sleeves for my cards - the size of the used sleeves is in the provided pdf. There are also dimensions of the trays in the provided instruction in case you use different ones (or premium ones)

* Try to be as lightweight and resourceful as possible.
The total amount of filament for the organizer is around 340g when used with the proposed settings.

If you like what you see or even was helpful, leave me a rating, like, or even a tip :-)

If you have suggestions or feedback, write in the comments section.

If you want to commercially use my designs (applies also to my other designs) visit my Patreon page.
If you want to support me with ongoing donations you can do so on my Patreon page as well - I will grant you a big thanks from me.

Have fun printing