Nekomata Okayu (猫又おかゆ) (4th Outfit)

Changes:

2023/12/25 - It was reported that some of the stl files were not working, so I have uploaded “stl_fix.zip” containing fixed version of the files "okayu_base_small.stl" and "okayu_leg_right.stl".

---

This is a sculpt that I originally created for Okayu's birthday in 2022:

https://twitter.com/Coal/status/1495775393596739585

This model wasn't originally created with 3d printing in mind since at the time I was only just learning that resin printers were even a thing, but I've finally had the time to go back and figure out how to make it work for printing. Looking back on this model from a year ago, there are several things that I would have done differently if I were starting today, so I guess that means I am improving a bit. :)

The model has been split into 20 different parts, which should hopefully make it fairly simple to paint. I've uploaded all the parts as separate STL files in the zip file “parts.zip”. I've also included the file “okayu_all_parts.stl” which has all the parts in a single STL (but the parts are still split up.) 

The file “okayu_parts.lys” is a save file for the Lychee Slicer software that includes the support I used to print my copy of the parts.

Several of my prints didn't come out fitting the greatest, so you may be better off redoing the supporting yourself. The shirt parts in particular had a lot of warping, but I was able to correct it a bit by heating the part with a hair dryer.

I'm still learning how to best split up models like this, so if you have any suggestions on how this could have been done better, feel free to let me know!

---

If you want to support my work, here is my ko-fi. Any support is appreciated but absolutely unnecessary.