the Royal Game of Ur (travel edition)

This year's christmas present for my brother. Thought I'd share it with you.

How to play: https://youtu.be/WZskjLq040I

The case measures roughly 220x100mm (without the hinges).

When printed with layerheight 0.2mm you can start switching the filament close to the top of the bottom PartB always after 2 layers to achieve the coloration. I used wood, white, black, blue, red, wood (in that order).

To achieve the color switching on the tokens you can also start at layerheight 0.2mm with one color for the first 2 layers, then switch to another for two layers and back until you reach the top, another switch back to the second color for two layers and then a last switch back to the first color for the last two layers.

The hinges can be attached with 2 x M3x5mm socket Cap Screws and M3 nuts (i recommend additional glue), and need 6 x M3x40mm socket Cap Screws for the latch mechanism and to connect the two case halfes.