Potion Bottles

3 designs of potion bottles that I made for my daughter to play witch/wizard.

They are relatively small to fit in kids hands. Thanks to the ridges of the layer lines, the cork stays in place when pushed in a bit.
 

Printing instructions (for bottles, excluding cork)

• Material: PETG or other
• Layer height: 0.25
• Perimeters: 2 (the model is designed to have a 4 perimeter strong wall with a 0.4mm nozzle)
• Top / Bottom Layers: Enough to make the bottom completely solid with no infill
• Infill: Does not matter much, as the model should be mostly solid with perimeters and top / bottom layers
• Supports: Not needed