Big Rig Truck 10-Wheeler Print in Place PLUS (See Video)

What is Print in Place PLUS? It's adding filament change stops to insert parts.

• Filament changes are set to 13.4, 29.6, 53.0, & 69.4 (for .30mm layers 69.5)
• Do not change color, instead just add tires and restart with same color.
• Tires will be printed into the truck permanently.

CAUTION - Be sure tires clear Pinda Sensor and Nozzle before continuing!!

it will be close but should not interfere.  Follow directions step-by-step:

Step 1: Print 10 Tires. You will need these when printing the main truck.

Step 2: At each stop add 2-3 Tires. Direction doesn't matter, they are symmetrical. Make sure they sit all the way down and clear the nozzle before continuing. Gentle- Dont snap them off print bed.
 

Repeat for every stop! So easy! 3-2-2-3

Here you can see the 4 stops in PrusaSlicer: