HO scale model of the Bombardier BiLevel Commuter Car. The car has become a staple in North American commuter service with over 1,500 built and more being produced. This contains all the files needed to print your own. The trucks for the BiLevel still need some refinement to get the unique outer disc brake effect and operational capabilities. In addition to the 3D printed parts some screws are required for assembly.
Parts list:
- 32x Full chair
- 2x End face
- 2x Interior Stairs
- 2x Coupler Covers
- 2x Mid floor inserts
- 2x End Brackets
- 1x Mid Stiffener
- 18x Pins
- 1x Mid stiffener 3
- 2x Mid stiffener 2
- 1x Roof
- 1x Main Floor
- 1x Side 1
- 1x Side 2
- 1x 2nd floor
Hardware:
- 4x 33" HO wheels
- 2x Couplers
- 7x M2x4 countersunk screws
- 2x M2x8 screws
- 2x M2x4 screws
- Glue
Instructions:
- Glue the End Bracket to the End Face using 3 Pins (2x)
- Glue the Mid Stiffener 3 to the middle of the Roof
- Insert and glue 2 Pins to the top of the step 1 assembly
- Glue the step 3 assembly into the step 2 assembly
- Insert and glue 5 Pins into the side of the step 4 assembly and attach Side 1
- Repeat step 5 with the other side of the assembly and Side 2
- Insert and glue 2 Pins into the Mid Stiffener
- Insert and glue the step 7 assembly into the main assembly. Make sure the screw hole is lined up as close as possible to straight down
- Glue the 32x Full chairs into the 2nd floor, floor frame, and mid floor inserts
- Using 4x M2x4 countersunk screws attach the 2nd floor and Mid stiffener 2 with the Interior stairs between them
- Slide the step 10 assembly into the main assembly and into the slots on the top of the Roof
- Glue the mid floor inserts into the floor frame. Be careful not to overlap on any important areas where screws will go.
- Attach using 3x M2x4 countersunk screws to the step 12 assembly to the main assembly
- Attach the couplers using the Coupler Covers and 2x M2x8 screws. Make sure to press the floor and shell together as the screw helps attach the two assemblies
- Insert the 4x wheels into the Trucks and attach the Trucks using 2x M2x4 screws
Golden Bear Models
