Giant Oversided Rumble Tape Transformer

So here is a G1 Transformers inspired Rumble / Frenzy clone.

I based the design off the actual patent drawing filed with the US Patent office. This monster is 8.5" x 5.5" in size and 11.5" tall when in robot mode.

I tried a new idea for leg and arm design where the joints are stiffer but still have strength. All the stl files have been pre-organized for the best printing results.

I made a last moment alteration to the Pelvis by adding in a rotating key lock. I haven't had a chance to get this yet so if anyone has issues please let me know. 

NOTE: keep track of your leg, arm and feet pins and they are all different I'm afraid to say. Nothing should be hard to insert. If it's loose that's fine as it will be contained. I highly recommend to dry fit pieces together to feel how firm or loose the joints are. If they are too loose add in 1 or 2 appropriate washers. Each one is 0.4mm thick. 

You will need 4x 10mmx1.5mm (or smaller) magnets for this. 

There is an instruction manual in the .zip file area called All Pieces.pdf. The other file All Pieces.zip is all the model but as individual pieces not orientated incase you need them. 

Any issues please let me know right away and I can address them.

Take care!

-max