2 Fast 2 Furious Display Base for Hot Wheels, Tomica & 1/64 scale cars

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, you can support me Printables Clubs! Just click the “Support & Join”  button beside my name or here: https://www.printables.com/@GigaPenguin#join:279  

Exclusive models are included too!

You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts

Description

The display will fit all Tomica 2F2F Evo7 and Hot Wheels Camaro release of the same casting. If you want the base to fit a different casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L

The hole size generally should fit most Hot Wheels and Tomica too, actual 1/64 scale cars might not fit (like Mazda MX5 which are tiny).

The display base is separated into 3 parts for easy printing and colour swap. The parts are:

1) Base

• BaseV1.STL

2) Base back wall:

• BoxBackPlain.STL

3) Flat Base:

• FlatBase.STL

Print Settings

Nozzle size = 0.5 mm (0.4 should be printable and likely better)
Layer height = 0.2 mm

Filament change layer for colours on "FlatBase":
1) Start (Overall lines colour, mine is in white)
2) Layer 3 (Overall road colour, mine is in black)
3) Layer 8 (Side decoration colour, mine is in brown)

Filament change layer for colours on "BoxBackPlain":
1) Start (Overall background colour, mine is in black)
2) Layer 8 (First layer building colour, mine is in silver)
3) Layer 23 ("2 Fast 2 Furious" lettering colour, mine is in white)

For multi colour building:
2) Layer 8 (First layer building colour, mine is in silver)
3) Layer 13 (Second layer building colour)
4) Layer 18 (Third layer building colour)
4) Layer 23 ("2 Fast 2 Furious" lettering colour, mine is in white)

Assembly

The car is tied by wires through the hole on the flat base and then tape to the base.

Back plate should slide in nicely into the display base and the back wall should slide in nicely into the slot in the base. Will require glue to make sure it holds properly.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

Custom display base designs are available from $5! Contact me to discuss what you want!