Dowel Puzzle - Brain Teaser - Some Changes

First of all, thanks to "Creative MinerX" for his 3D printed version of "Dowel Puzzle", especially for the filigree, practical cover that makes the puzzle transportable and gives it a more valuable look. Unfortunately, the cover causes it to close only when the puzzle's solution is included. That can't be the point! 

My idea now was to continue the idea with the cover, but without including the solution. For this, some changes had to be made, both to the box and to the cover.

To make the "dowel" that belongs in the external compartment easier to recognize, I printed it in a different color. This saves searching for the matching "dowel"!

Dimensions cover: L 130 x W 66  x H 21 mm

Print Files:

• dowel_puzzle_box.stl
• dowel_puzzle_cover.stl
• dowel_puzzle_1pc.stl
• dowel_puzzle_7pcs.stl
• dowel_puzzle_8pcs.stl

Print Settings:

• Printer brands: Prusa, Flashforge 
• Printer: i3 MK3S, Finder 
• Supports: No
• Resolution: 0,2
• Infill: 15%
• Filament brands: Prusa; ICE
• Filament colors: Galaxy Black; Romantik Red, Young Yellow
• Filament material: PLA

Remark: As all parts are designed to fit very precisely, it may happen that you have to rework one or the other part a bit with sandpaper and/or cutter due to different dimensional accuracy of the printers and the different behavior of the filaments.

If the box is a bit sluggish when sliding into the cover,  careful sanding the edges will help, especially the edges that were on the print bed.