Extended Pokemon Card Box

This is an extended version of Tonyk's excellent Pokeball card box, for those with more cards (also fits sleeved cards). This version's roughly 3 times longer than the original, measuring ~178mm long.

You need to print 2 copies of the “ExtendedCap” (one white and one red), along with a single “ExtendedCenter” and a single “Button”.

Print details:

• For the ExtendedCap: print the larger flat side down, for the ExtendedCenter: print the large hole down.
• 0.3mm layers.
• 0% infill (there's no room for it anyways).
• I used brims to prevent warping.
• Use a satin sheet if you have it to add a great finish to the box.

My filaments:

• Overture Pro Black PLA
• Overture White PLA+
• Polymaker Red PLA