Beyblade Arena

My biggest self-designed 3D printing project so far (overall size 536 x 371 x120mm). I designed and built a beyblade arena for my kids.

The arena is made of several parts because I wanted to minimize the amount of material. Nevertheless this is a quite filament consuming project but I really like the result and my children are happy.

After printing and clueing the floor with 2 component adhesive I used filler material and grinding to get a smooth surface (especially in the middle of the arena). I also painted (with aerosol lacquer) the floor.

To build the arena you will need 2 pieces of all the parts, a couple of screws and nuts (M3, 3x20,...) and e.g. epoxy resin to clue the parts together.

UPDATE: a detailled instruction for assembly etc. can be found at: https://www.instructables.com/member/Legufix/instructables/