Walkie-talkie, that does nothing but you can press buttons to light them up, or turn them off. Ideal toy for kids :)
BOM
- 4x self-locking push buttons 5V (https://www.aliexpress.com/item/32921319398.html)
- 1x 2AA battery holder (https://www.aliexpress.com/item/1005002277845095.html)
- 4x M3x10 screws for the enclosure
- 2x M3x5 screws for the battery holder
- Some glue for the "speaker"
Print instructions
- Print with supports, especially on the antenna
Build instructions
- Print the enclosure with one color, the speaker with other color.
- Glue the “speaker” to the front enclosure with some glue (Ideally not CA glue, because it leaves some white stains on the print).
- Insert the buttons and wire them as in the diagram included.
- Use smaller screw to attach the battery holder. You may need to drill new holes to the holder to fit in the screw holes.
- Check the functionality and screw the enclosure together.
- ???
- Profit.
MileStorm
