August 6, 2023
Description
This battery cover was designed with an internal width of 29mm, a length of 106mm and an height of 23mm, which, combined with the 12,75mm of height of the original battery compartment arrives to 35,75mm, so it holds comfortably a 1000mAh 3s lipo. To close it i used this thumbscrew with a m3x16 hex bolt and, obviously, a m3 nut.
Designed with a “fun” battery design on the top, but i also uploaded a plain version.
Print it as is with supports from the buildplate enabled, since it's such an horridly designed battery door geometry in regards to 3d printing!
License:
Creative Commons — Attribution — Share Alike