August 8, 2023
Description
My brother wanted to make a 1 inch circle around the hole for his cornhole set. He asked me to design a stencil for that. I made an aligner as well.
1: Put the aligner in the hole
2: Put the stencil over the aligner, they snap into place.
3: Tape down the stencil
4: Remove the aligner
You will now have a perfectly aligned 1inch ring of paint around your cornhole set.
NOTE: Paint will slide into the grooves of the wood if you don't put down a layer of poly/clear coat first.
TinkerCADs:
Template: https://www.tinkercad.com/things/3RuMpJsAP9G
Aligner: https://www.tinkercad.com/things/a3aguXUed4s
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
Filament: Inland PLA Green
Notes:
This stencil barely fits on the Ender 3 bed. I designed the little omitted squares to accommodate the bed clips, but I just ended up taping the bed down with masking tape instead. Print without a brim skirt to make it fit.
I printed the aligner with 1 layer on the bottom, no layers on top, since it's a tool that was only going to be used once. The stencil itself has 4 layers on top and bottom so paint doesn't seep through.License:
Creative Commons — Attribution
LegendaryCheez
