August 19, 2023
Description
A splitter track for the ZombieHedgehog/Polymaker marble run!
This model does not require any fasteners or glue. It is held together by the same magnets that will connect it to the whiteboard.
A splitter track is a fairly common marble run mechanism, but I've designed this from scratch with no references as a design challenge for myself to see if I could figure it out. This is the result.
It's a 3 part marble run track:
Center of track to the end of the magnet is 15mm.
Includes holes for 10mm x 5mm magnets. (up to 3 magnets per assembly, but you could probably get away with the 2 just in the cover)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
TotallyRidiculous
