May 27, 2024
Description
This is a hub to retro-fit HobbySoul aluminum beadlock wheels to fit a 3dsets truck. This hub will fit the 8mm axle shaft perfectly and its adjusts the offset slightly + (closer to the car) so it will not rub.
You will need to 6mm screws – or cut the ones that come with the wheels – to attach the hub, as the ones that are originally used on the HobbySoul wheel are too long.
Print at around .16mm with 100% infill.
Known wheels that are compatible with hub:
License:
Creative Commons — Attribution — Noncommercial
soulrider911
