Lid for Rushhour game by BinaryArts

I found the game “Rushhour” by BinaryArts when I ran into a 3D replica of it.  I didn't want to spend so much time printing all the cars so I just bought a retail version for a few dollars on eBay.  The lid that BinaryArts provides with the game is garbage and breaks the second you look at it wrong.  This remix is really just a version of the original with parameters set correctly to fit the Rushhour game.

The hinges are optional and meant to form clips over 3 of the sides (I recommend leaving the card drawer side open.)

The lid is a little loose fiiting.  I added 8 strips of “soft" side Velcro to each of the 8 inside corner edges and it created a nice pressure fit.

If you want to print the letters to glue to the top of the box, print them inverted with a brim.  Then try to get the letters off with the brim intact.  That way when you flip the letters over, the brim is on the top so you can much more easily make sure the letters are all oriented nicely.