Snowman

This is a realistic friendly little snowman. The body looks like a real snowman shaped by hand. The object is hollow so it does not use much filament. Heigth without hat is 9.5 cm (3.7 inches). Weight with hat approx. 37 g. Glue is needed for the final assembly.

You can print your snowman without the hat and glasses and decide later, if you would like to print and glue the hat and glasses or not.

List of items to print:

• Snowman V2.stl

Snowman body with the 3 balls. Print once in white color.

• Arm left V2.stl, Arm right V2.stl

Print once in brown (= wood) color.

• Eye V2.stl

Print twice in black color.

• Mouth V2.stl

Print once in black color.

• Button V2.stl

Print three times in black color.

• Nose V2.stl

Print once in orange color.

• Hat back V2.stl, Hat front V2.stl

Print once in black color. The hat is divided into 2 parts to avoid supports. Glue the parts together after the print.

• Glasses V2.stl

Print once in any color you like.

Enjoy printing this object.

Print Settings

Printer:

FLSUN Super Racer

Rafts:

Supports:

No

Resolution:

Infill:

20 %

Filament:

GIANTARM, TINMORRY PLA

White, black, new brown, orange Post-Printing =============

Glue the eyes and nose into the holes designed for them. Add the mouth to your liking under the nose. Glue the three buttons into the insets on the lower and middle ball. Glue the arms into the holes of the middle ball.

You can have your snowman without or with the hat. If you prefer the hat, glue it in some slope onto the top ball.

If you would like your snowman to have glasses, glue them in place.

How I Designed This

This object was designed with Blender. With the sculpt mode it is very easy to model the realistic snowballs.

Category: Creatures