March 6, 2021
Description
A great model by Milos. (https://www.myminifactory.com/object/3d-print-batman-on-a-roof-45713)
Time-lapse print video : https://youtu.be/uxLFw1A8tTA
Remix to support free and printed.
Tips: Try to lower along Z until all lowest points starting on the bed with reasonable footprint. Then enable raft to enhance adhesion.
You can review batman-on-a-roof_KK_70g_X2_CCW.gcode in Cura which is the gcode I used for the above timelapse.
Post print tips: Use hairdryer for the cape. :P
Subscribe to find out more support free 4K Time-lapse video:
Subscribe Now!
youtube.com/watch?v=0m4EnaPzadk&list=PLiilF_5yk3dPSMlEYUnDXscJI6oKquxvo
Addiction to 3D Printing? Watch these time-lapse!
https://youtu.be/-ZsXFX6hjXk
https://youtu.be/L4IDmn3miE0
https://youtu.be/vVaeYkDoaJU
https://youtu.be/MUwXdUdHs64
https://youtu.be/jKpW-CI5O6M
https://youtu.be/udcIfDywoIo
https://youtu.be/XKDxQ8CsMJU
https://youtu.be/-M99N8JkQxQ
https://youtu.be/H-\_2R-mKoMo
https://youtu.be/vPmPJOiqFYw
https://youtu.be/lwuSK4M\_dRs
https://youtu.be/5WOnIP-qwVk
https://youtu.be/RLnsV9CKTNU
https://youtu.be/9w7k7XRm34Q
https://youtu.be/uxLFw1A8tTA
https://youtu.be/F1pj7ACaZ70
https://youtu.be/tbOhFjlpp0c
Category: People
License:
Creative Commons — Attribution — Noncommercial — Share Alike
iczfirz
