December 19, 2023
Description
While I was experimenting with trapezoidal threads I found out that this nut and bolt combination is quite a nice fidget toy.
The parts are easy to print without support but they need a layer height of 0.12mm or smaller. Otherwise the outside of the thread flanks is not supported by the underlying layer. Besides that I recommend 3 walls, 4 to 5 tops & bottoms and 15% infill.
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
blecheimer
