March 25, 2021
Description
Camber for classic Scalextric with black tracks. Provides an elevation of 2, 3 or 4 centimeters to make the climb smooth. They must be made pairs except the central one, which can be only one.
I have separated the support piece from the track of the columns to avoid printing with supports. It can be glued with cyanoacrylate.
The filling does not matter, the first test I did it at 10% and it works well, but the following ones I did it at 30% for greater resistance.
New Scalextric: https://www.thingiverse.com/thing:4615106
Peralte para el Scalextric cláscico de pistas negras. Proporciona una elevación de 2, 3 o 4 centímetros para hacer el ascenso suave. Hay que hacerlas pares excepto la central que puede ser una sola.
He separado la pieza de apoyo de la pista de las columnas para evitar imprimir con soportes. Se puede pegar con cianocrilato.
El relleno da igual, la primera prueba la hice al 10 % y funciona bien, pero las siguientes las hice al 30% para mayor resistencia.
Para el Scalextric nuevo: https://www.thingiverse.com/thing:4615106
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Doesn't Matter
Supports:
No
0.2
Infill:
20%
Notes:
Any material does the trick.
License:
Creative Commons — Attribution
orangepiweb
