October 15, 2023
Description
My daughter destroyed 1 of the axles because she dropped the fire truck. While I wanted to repair it, I dropped the truck again and destroyed the other 2 axles. What a genius.
So I separated the axle in PrusaSlicer and drawed a small repair strip which you can glue on the bottom of the model to hold the axles in place. I printed the axles in Prusament PETG and the strip in Polymaker Polyterra PLA.
Maybe you have to grind/cut some parts of the model away to “click” the axle back in place and to glue the strip.
It's just a quick and dirty fix, so you don't have to reprint the whole model.
Maybe consider using a brim.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
PennybridgePioneer
