October 22, 2023
Description
** IMPORTANT **
Make sure to use some XY-compensation so the pieces can slide together. On my Prusa MK3s+ I used -0.1, but you may have to use slightly more or less depending on your printer.
What is it?
This is one of the smallest 3d printable chess sets that is still viable for play. When stacked up, each side's pieces only measure 8.4x2.2cm, which is tiny! Inspired by this other print; my pieces are more realistic.
Relatively simple print with no supports required, and each set of 16 should take about 3 hours. Needs about -0.1 XY-compensation for good fit.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
rivka
