Tanjiro’s Replaceable Blade Collapsing Katana

This version is for those who don't want to glue parts together. The hilt prints all at once, the cap is not glued on but is removable by squeezing its sides. The blades then can be printed separately then inserted or replaced. It was printed in three colors with some manual filament swaps. 

Supports are not required, for best results use a .4mm nozzle. The blades can be printed all at once concentrically or individually in vase mode. I suggest printing in vase mode but if printing concentrically, the test print can be found here. Find detailed instructions on how to print collapsing swords on my website. 

Printed on the Muldex rep-rap IDEX printer