November 6, 2023
Description
This is a very simple puzzle for kids under 4 years old.
This puzzle has 4 parts so it is best for 2 years old and toddlers.
You may print a regular version or version with room for small magnets which then can be applied on door or fridge door.
!!! If you print the version with magnets please make sure you use a good glue before inserting the magnets to avoid any option of magnets to fall from the puzzle - choking hazard !!!
Link to magnets i used: https://www.aliexpress.com/item/32866041091.html?spm=a2g0s.9042311.0.0.27424c4d8PMoE6
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
Filament: overture petg black
Notes:
If you print the magnet version please rotate the model so the holes will face up for better results
Link to magnets:!!! CHOKING HAZARD - MAGNET VERSION ONLY !!!
Add magnets
Use super glue in holes and insert the magnets.
Make sure all fit in
I used tinkercad
License:
Creative Commons — Attribution — Noncommercial — Share Alike
idona
