Print-in-Place Spinning Helical Gear Fidget Tortured test

A satisfying print-in-place fidget working right off the print bed that you won't put down. Super fun, but small enough to put in your pocket. Originally I made not to be a torture test but after realizing how hard it is to print I made it one.

Tips for printing:

• 0.15mm with a 0.4mm nozzle. 
• Do not click arrange in the slicer.
• 10-15% infill is enough for speed and weight.
• If the print doesn't have enough clearance scale it up and it still works well scaled up by 10%.