The White Castle insert VERSION 2 (supports sleeves)

UPDATE 12/12/2023
 

I have published a "Version 3" of this insert which holds the assembled bridges and meeple boxes with grid lids to place on the player boards. As with "Version 2", there is a very slight "lid lift." Version 3 is available here: https://www.printables.com/model/679008-the-white-castle-insert-version-3-supports-sleeves. I'm leaving the other versions available as each have different pros and cons.
 

This is an insert designed to fit the game The White Castle. It supports sleeved cards and will hold the assembled bridges with about 2-3mm of "lid lift" (assuming only one rule book is stored in the box). This is one of the tightest fitting games I've ever designed an insert for, so the design is a bit unusual. In particular, all but one of the players' heron pieces are stored in the box "loose."

Note 1: If you don't want any "lid lift," I have an alternate version of this insert which does not have room for the bridges available here: https://www.printables.com/model/629696-the-white-castle-insert-supports-sleeves

Note 2: If you have already printed my previous insert for this game but wish to change to this one, you can reuse the card boxes (although the ones in this version are slightly taller) and the lid for the money box. Everything else hass changed.

The boxes with lids print best at 0.16 line height (0.4 nozzle) but 0.20 is OK for everything else. You really want to use 0.16 (or lower) for the boxes with lids as there are some small but steep overhangs that are supported much better by a slightly smaller line height. (Check your slice preview.) No supports are needed if you print at 0.16 or lower.

I printed these with 15% gyroid infill, but you can use 10% infill if you increase the number of top shell layers by one (or if you don't care about slight imperfections in the bottoms of the boxes). PLA/PLA+ works great for all of these.

Finally, the lids for all the boxes are friction fit and fit the bottom of their boxes so they don't get lost during play. The tolerances on these can be somewhat tight, but they came out beautifully on my Bambu X1C.

Model specific notes follow:

cards_box_v2_1.stl, cards_box_v2_2.stl - Print one of each. You can add color on layer 4 or 5 (depending on line height) to make the embossed lettering at the bottom stand out.

bridge_box.stl, bridge_box_lid.stl - Print three of these, one for each bridge and matching 5 dice.

money_box_v2.stl, money_box_v2_lid.stl - Holds the various cardboard tokens (money and Daimyo). Print one of each. You can probably print these together on the same plate.

player_box_v2.stl, player_box_v2_lid.stl - Holds all the player meeples and markers, except the heron token. Print four of each box/lid pair, one in each player color (if you so choose). You can probably print one pair of box/lid together on the same plate.

setup_box_v2.stl, setup_box_v2_lid.stl - Holds the game board tokens used to setup the game. Print one of each. You can probably print these together on the same plate.

turn_token_box_v2.stl - Holds the big wooden turn token. This is optional, but makes everything fit nicely. Print one of these.