May 6, 2021
Description
Filament: Designed for PLA
Infill: 5%
Layer hight: First layer 0.35mm, Remaining layers 0.3mm
Nozzle: 0.4
Nozzles temp: First layer 215c, Remaining layers 210c
Bed temp: First layer 60c, Remaining layers 60c
Supports: Yes, Rectilinear. Set overhang threshold to 2 degrees, and pattern spacing to 5mm
Print time: Approximately 10 hours and 7 minutes
Filament required: Approximately 42.15m
Works on 6 inch beds
Works on not heated beds, with the inclusion of at least a 5mm brim, and maybe some glue.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
PealPrint
