On Mars: Building Tile Tray (Remix)

This is a remix of a Building Tile Tray for the board game On Mars that was originally shared by dthester. I liked the design, but felt it needed some improvements. The original tile base posts broke easily, so I thickened and widened them. In order for the red plastic cover to still fit on top, I thinned the back wall of the tray. I also increased the depth of the space for the cardboard insert at the front so that it now sits flush with where the tiles start.

The cardboard insert space in dthester's original is exactly the right dimensions for the cardboard insert (about 235 mm by 28.5 mm). However, my insert would not fit, probably due to a touch of overextrusion when printing using an 0.8 mm nozzle. I have included a second remixed version that has been slightly expanded (to 236 mm by 29.5 mm). My insert fit perfectly in this version.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 5

Rafts:

No

Supports: 

No

Resolution:

0.8 mm Nozzle; 0.2 mm Layer Height

Infill: 

20%

Filament: Ender; Paramount3D PLA "Red"; Karnak Sandstone

Notes:

A filament swap was done after the base layer was complete.

How I Designed This ===================

The remix of dthester's original .STL file was done using MeshMixer.

Category: Games