Amsterdam Board Game

This two-part resource wheel is used to replace the cardboard wheels that come with the game. Each player would need 1 set of wheels (4 players max, so 4 times). This wheel is about 1mm thicker than the cardboard wheel. However, the overall diameter is smaller. Therefore, you can fit these wheels inside the box way better (no overlapping on top of each other like the cardboard wheel)

I printed the Wheel Base with support turned on due to the stick-out tab on top of the center axle. If you have a great printer, good filament, and great settings, you might not need to turn on the support setting (try at your own risk though). I also switched on the “ironing” setting to smooth out the wheel base's top surface. This step is unnecessary. 

I colored the whole wheelbase using Bambu Studio and AMS. You can pause and switch filament mid-run if you want to color the wheel based on player color. 

Let me know if you run into any problems or if you have any suggestions. Thank you very much and happy printing.