DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Image 1

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Image 2

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Image 3

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Image 4

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Image 5

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Image 6

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Thumbnail 1

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Thumbnail 2

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Thumbnail 3

DUMMY 13 goes to COMIC CON - Catwoman V1.0 3D Printer File Thumbnail 4

DUMMY 13 goes to COMIC CON - Catwoman V1.0

Mici

Description Comments Tags

Description

13. Dec. 2023:
Incorrect naming corrected
Missing part added
Sorry for that!

Based on DUMMY 13 Beta - Oct. 2023

Get your Dummy 13 here: /model/593185

DUMMY 13 loves COMIC CON!

So I have started to design a whole series of characters and costumes for DUMMY 13. This is another costume from the series "DUMMY13 goes to COMIC CON".

The aim is to preserve the charm and simplicity of Dummy 13.

Content of CatDUMM, sorry Catwoman:

Mask
Hands with long fingernails
High-heel-booties (optional)
Sexy female body
Whip handle
Whip holster on the hip
Other parts are standard parts

Get more:

Female Armor: For other female body versions, have a look at my female body set: /model/637152
Whip: You will need a piece of cord or very soft TPU Slide it into the handle Fix it with glue
High-heel-booties: Catwoman is still not hot enough for you? Take a look here: /model/659695
Mask: Slide the head into the mask and press it in with gentle force on the chin. If this is not possible, it is probably due to the following points: Check the inside of the helmet (mostly the top and behind the eyes) to see if it has been printed cleanly and remove any filament debris that is sticking out Has the brim been removed cleanly? The elephant foot can cause the inner rim to be a little too narrow, just sand the inner rim down a little or work it with a knife

Printing:

	Layer height	Brim	Supports
Mask	0.15mm	x	x (below the eyes)
Hands	0.10mm*	-	-
Whip handle	0.15mm	-	-
Hip holster	0.15mm	-	-
Body	0.15mm	-	-
Neckline insert (multi part)	Best with 0.25 nozzle @ 0.05 mm	-	-
Original parts	Please note the recommendations on the original model

* Since I mostly use rPLA, I sometimes had the problem that some fingernails broke off easily.

Use high quality filament
It can be useful to print the fingernails with a lower layer height (0.05mm) to obtain a more rigid structure, e.g. by using modifiers in Prusa Slicer

License:

Creative Commons — Attribution — Noncommercial — Share Alike

DUMMY 13 goes to COMIC CON - Catwoman V1.0

DUMMY 13 goes to COMIC CON - Catwoman V1.0

Related Models