TGC Slabs stand holder 4+3 (7 cards)

Print your own TGC Slabs stand (initially made for Hermicraft Alt-Art collection).

Version 4+3 slots (7 cards).

There is two sub-release available :

• Stand-4+3-LIGHT → With a depth of 6.80mm in each slots
• Stand-4+3-LIGHT-TIGHTER → With a depth of 6.40mm in each slots

You'll also find some “Spacer”, only needed if the card move too much in its slot (you can also use some pieces of paper).

I also included two "Test print" models to check the result with only one slot :
Stand-TestPrint-LIGHT → With a depth of 6.80mm for the slot
Stand-TestPrint-LIGHT-TIGHTER → With a depth of 6.40mm for the slot

Print Settings

• Printer brand:

Creality

• Printer:

CR10S PRO

• Rafts:

Doesn't Matter

• Supports:

No

• Resolution:

0.20mm

• Infill:

20%

• Filament brand:

NA

• Filament material:

PLA