Dummy 13 Weapons Pack Version 2.0

Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too.  Make or use these at your own risk.

There is an updated version 2.1 of this Dummy 13 Weapons Pack, which incudes a pump action shotgun and a few other fully redesigned weapons.  You can find that model here:

https://makerworld.com/en/models/888476#profileId-844361

This is version 2.0 of the Dummy 13 Weapons Pack.  It includes some updated models from version 1.0, and some new models as well.  The shotgun was dropped in exchange for an MP5SD looking weapon.  Also new, are a pair of MP5K's, so Dummy 13 can look like Neo taking on the Matrix, at least until the thought that maybe Dummy 13 is part of the Matrix enlightens a synapse in it's AI enabled cortex, leading to an existential crisis… 

Once you've rebooted Dummy 13, it can be outfitted with a pair of AI friendly All-American survival knives (red bandana encouraged, but not included).  If Dummy 13 needs more pew-pew, and less stabby-stabby, the v1.0 handgun models are still included, with a slightly updated design that will hopefully keep them more secure in the holsters.  The remixed holsters from Mici's original design are also still included for convenience, as are the remixed katanas, with a slightly different tsuba design.  The handguns and holsters go great with Mici's Dummy 13 Deadpool costume, in case you may be wondering.

I almost forgot to mention, the MP5SD looking weapon has an extendable stock*

*The stock will only extend if the printer is really dialed in, otherwise it may end up fused.  It took about a dozen test prints to get the telescoping stock working right, and my printer is pretty decently dialed in (cough - just ignore the stringing in the pics though :D).  If it does seem a bit stuck, sometimes giving the stock a light twist back and forth can free it.  But if it won't pop in or pull out with a modest bit of effort, it's fused, so enjoy your MP5SD looking static model, and forget I mentioned anything about an extendable stock.

There is an integrated support for the MP5SD in both versions of the STL's, and it's based on a 0.2mm layer height.

Other Stuff:

If you like this design and want to check out some of my other Dummy 13 stuff, here is a list of my Dummy 13 Weapons and Adventure Packs:

Weapons Pack V1.0 - Shotgun, Handguns, Holsters and Katanas (superseded by the v2.1 pack)

Weapons Pack V2.1 - MP5SD, MP5K's, Pump Action Shotgun, Handguns, Holsters and Katanas

Sci-Fi Weapons Pack V3.2 - Halo/Sci-Fi Inspired Rifle, Handgun, Shotgun and Machetes

Sci-Fi Weapons Pack V4.0 - Star Wars/Sci-Fi Inspired Rifles and Pistols

Alpine Adventure Pack v1.0 - Skis, Ice Axe and Backpack for Winter Adventure Sports

Astronaut Tools Kit v1.1 - Space drill, pick, geologic collection scooper, camera and other Astronaut stuff

BBQ Tools Kit - You read that right, even Dummy 13 likes to grill up some burgers now and then

Roadside Assistance Kit - Traffic cones, a bottle jack and other tools

Big thanks to Lucky 13 Toys (Soozafone) for sharing the awesome Dummy 13 (v1.0) model with the world. The Dummy 13 model (which this was designed for) is shared under the following license:

Note - if you see these for sale on Amazon , Etsy or anywhere else, they are not being sold with my permission. There are no "authorized" sellers of these models. They were made for the 3D printing community, not for Amazon or Etsy sellers to profit from.

If you find these models useful, please post a like or a comment with some pics of your prints. You can find the other things I'm working on at my blog here. You can also follow me here, on BlueSky or on MakerWorld, to get news on any new stuff I post.

If you would like to support my work, you can “Boost Me", or  even Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuffmystoopidstuff

Thanks for looking!

Changelog:

Update 12/23/2023: It was pointed out in the comments that the katana blades had a small gap, which I had not noticed before (mine printed fine).  Upon closer examination in ViaCAD I could see the problem as well, and corrected it.  I also found and fixed a small error in the knives.  All the files here are updated with the fix.  Big thanks for MostlyDave for pointing out the problem with the original files!

Update 12/30/2023: Thanks to Jack Romashof for posting the remixed katana holder with a longer peg.  After seeing the remix (and becoming aware of the issue), I updated the katana holder here with a slightly longer peg (and tested it).  I also corrected a minor issue with the holsters, to fix a first layer issue on that part.  Both the V1 and V2 weapons packs have been updated with the changes.

Update 2/24/2024: There is a minor update to the model, which adds some small details to the knives and katana handles.  The knives are also redesigned to fix a problem with the original models.

11-20-2024: If you've had issues printing the knives, and would like to help me test an update to this design which could help, please try the test model named “Weapons_Pack_v2-2Z_KNIFE_TEST_E.stl” (see pic below).  I've never had issues printing the knives on my printer, so although the dozen of tests I've run on the update have been fine, they do not prove much (so I could use feedback on the test design from somebody who has had problems with the knives).

12-5-2024: I uploaded a 3mf profile (from Bambu Studio, but it should also work in Orca).  The profile incudes 3 plates with a painted version on a kit card, as well as an unpainted version without the card, and finally a stand alone model of the MP5SD type weapon.