Futurama Planet Express Ship MMU Parts

Split up specific stls for printing with different colors in case you have an MMU or equivalent.

• Teal bits
• Green bits
• Gray bits
• Black bits
• Red bits
• Blue bits

This is meant to be printed as separate parts (like the original model) and not a single-whole-ship print. So import all the stl files prefixed with “ship_” as one part; and then import all the stl files prefixed with “shipBTM_” as another seperate whole part; and then “tail_”, "thruster"_", “turret_”, “Wing_Left_”, “Wing_Right_". You can print more than one part on the bed at the same time just make sure to import all the files for that specific part together as a single thing. 

I printed at 150% so the tail logo comes out nicely [at .2mm layer height]. But because of that it won't fit in a MK3S in the originally vertical orientation. Instead, I split it horizontally below the red line. I printed with auto supports from bed, but some things (like the tail logo even) seem fine without.

Ship.Top has 6 colors, but the red is only used on the bottom section. So make sure you swap out your red filament for blue [window] filament after those layers finish. You don't necessarily have to M600; you will have lots of time to get that done. Or do something similar.

Some parts are kinda jank since I had to reduce the mesh in F360, but it works.

The specific teal filament I used is Polymaker PolyTerra PLA - Forrest Green

Original model by ChaosCoreTech