Marvel Zombies Insert

Updated: Added Name Tags (v2) that include Silver Surfer for those that have that expansion.

This insert allows you to condense a Marvel Zombies All-In pledge (minus Galactus) into just three boxes (core box, stretch goals box and x-men box).

You will need to print:

Stretch Goals Box

• 1-row-bunk - Qty 2
• hero-card-tray - Qty 2
• mini-card-tray - Qty 2
• token tray - Qty 1

Core Box

• 3-row-bunk - Qty 4
• mini-tray-3x5 - Qty 8
• mini-tray-5x7 - Qty 2

X-Men Box

• 2-row-bunk - Qty 2
• 3-row-bunk - Qty 2
• 2-row-bunk-deep - Qty 8
• tall-bunk - Qty 2

Tags

• bunk-tag - Total Qty 96
  • Living Tags - Qty 55
  • Zombie Tags - Qty 41
• bunk-tag-deep - Total Qty 62
  • Living Tags - Qty 37
  • Zombie Tags - Qty 25

See the “Tray Layout” PDF document for how to fit all these trays into the boxes.

Miniature Locations

The miniatures can go wherever they fit, however you can use my layout (see the PDF's) if you want to also use my miniatures index (see the PDF's).  The index can greatly improve finding the required miniatures for the game.

Miniature Trays

Some of the trays for the troopers,guards,bystanders, etc are designed to be easily removed from the box and placed on the table so you can use it during gameplay.  Since the mini's just sit on these trays you should make sure to store the core box flat.  If you want to store this box vertically, you will need to find some way to magnetize or otherwise fix those minis in place.

(Note: I tried using magnets on these, however I found it annoying when adding/removing large amounts of troopers as they kept trying to stick to one another.  Not something I recommend)

Token Tray

The token tray is designed to fit a smaller portion of the included cardboard tokens (since not all are being used).  The tray is designed to fit the same amount of tokens that come with the “Plastic Tokens” addon.  (NOTE: I don't own the plastic tokens add-on, so this was design to work with the cardboard tokens!)

Galactus

This insert was designed without Galactus, however there should be enough space to tuck silver surfer beneath the wings of Dark Phoenix.  There is likely enough room for the cards as well.

Card Trays

The card trays are designed to work with sleeved cards (I used Gamegenic premium sleeves).

Name Plates

The name plates are optional, however they greatly increase setup time.  I found it best to print this sheet on a full page sticker/label sheet and cut the name out.