Hitway H5 - Bag Holder Adapter

Basic information

This is a bag holder adapter for the Hitway H5 E-Scooter and for additional bags to be attached to the front of the handlebar.

The Hitway H5 has a round handlebar in the upper area, but a kind of hexagonal handlebar in the lower area. In the lower area, the original connection block of the bag only fits with difficulty, as it is usually designed for round or rectangular handlebars.

Model information

The adapter is specially designed for the 2 liter bag from CHICLEW (https://www.amazon.de/CHICLEW-Rollertasche-Lenkertasche-Vordertasche-Elektroroller/dp/B08PV92K96?th=1). In principle, however, it should work for various bags that have a flat connection block.

Printing and assembly instructions

Simply print it (i recomment using the original print profile, otherwise see my print settings), place it between the original connection block and the handlebar and everything should fit without wobbling. Make sure to insert the original fastening straps into the holes provided in the original connection block (see pictures).

If you have questions, don't be shy. :)

Print Settings

Printer Brand:

Bambulabs

Printer: 

Bambu P1S

Rafts:

Yes

Supports: 

Yes

Resolution:

0.16

Infill: 

15%

Filament: Filamentworld / Bambu Labs PLA Black

Notes:

Additional settings I used:

• Walls: 6 
• Infill Pattern: 3D-Honeycomb 
• Tree support 
• Brim: 5 mm