My son wanted a dice tower of his own as he had been using an early version of one of my dnd boxes for rolling dice. I quickly put this together for him and had it printed in a couple hours. The base and the tower lock together so they don't move around.
Version 2 Changes:
Noticed that my kids were breaking the parts off the top. Added a bar around the top to make them more sturdy
Added parts to the underside of the ramps so that it could print without supports
Filled in the part under the bottom ramp so that it was solid and not hollow
Changed the front wall on the base to be thicker and a little more snug when the tower is stored in it.
Info:
Tower v1:
Overall size: 99.68mm tall x 51.37mm wide x 51.37mm deep
Supports needed
Suggest blocking supports on the underside of the tower as they are a pain to remove
Tower v2:
Overall size: 99.68mm tall x 51.37mm wide x 51.37mm deep
No supports needed
Base v1 & v2:
Overall size: 27.69 tall x 59.39 wide x 119.39 deep
BiggBadaBoom
