Click-Together Train Track Bridge Supports (Brio & IKEA compatible)

If you have these train sets then you know how much the kids love them.  After some time they get bored and need new challenges… well, here it is!

I needed something which would allow us to make higher bridges, but also stable enough that didn't fall apart when touched.

These fit the Brio and IKEA tracks, and I made the tolerances so large that most train sets should fit without any issue.

To stack: Turn 90° to one another, squeeze the short sides and click them together (best done by an adult).  The connection is strong enough for even the most active kids.

To print: best to print the track inside the riser to save build plate real estate.  Once done, just push/click them together.. there should be no glue required.

The riser is best print with a skirt, as the footprint is quite small and they like to move on the build plate.

To store: these stack together quite nicely to save space in the kids toybox, and makes cleaning up fun for the kids.

Also if you need some connectory:  https://www.printables.com/model/243928-rapid-print-track-connector-for-brio-ikea-wooden-t

Happy Printing!