January 19, 2024
Description
A wall mount for the Star Wars Eta-2 Actis-Class Jedi Interceptor (also known as the Eta-2 Actis Jedi Interceptor, Jedi starfighter, Actis starfighter, Jedi interceptor, or simply Actis) toy from Hasbro.
I made this a few years ago and just realised I never shared it here! (you can probably tell from the images that I have since removed the double door I originally placed them above, and they're now no longer nicely aligned lol)
The mount was made for hanging my Jedi starfighters above my double doors, so the ships do have a slight downward tilt to them if you rest the centre nub on the grooved middle part of the arm, if you position the nub below the arm the ship will sit nice and level. (The tilt is due to the weight of the ships, so a stronger print will have less of a tilt)
I printed PLA (eSUN PLA+) with a gyroid infill at 15%, and no supports.
The screws I used were M4 x 16mm.
Hook the rear top engine with the circular mount, and rest the grey plastic thing, next to the circular window, on the arm. See the video for an example.
Rest the centre nub on the grooved centre part of the mounting arm, this should cause the ship to have a slight downward tilt (see images)
*NOTE:* The strength of the print will greatly affect this, a stronger print will have less of a tilt.
Position the centre nub below the mounting arm, the ship should sit level.
The wall bracket part was remixed from: https://www.tinkercad.com/things/fz2LNraTgx8-xbox-one-controller-wall-bracket
License:
Creative Commons — Attribution — Share Alike
TheOjo
