MagicBox - MTG

Nozzle 0.4 (60°C), layer 0.2 (210°C)

Box: No support, quality print no speed (mk3s+), 

Bottom: easy peasy

Lid: Be sure you have perfect 1 layer. It should be consitent and full of material. If you can see through, it will probably tear apart because of manipulation. 

After printing, carefully clean the channel for the lid. In case of stucking use a tiny drop of oil or some lubricant. My printer have strong extrusion so i have a little bit widder first layer. If lid cant fit into box, try using scissors (only little bit).  Dont forget to clean the oil from other parts. It may destroy the playing cards. 

You can print the lid in two colors. If you change the color at high 1,40 mm, logo will have the first color.

You can instal the lid through the point where channel have a little branch.

Use super glue for securing the bottom in the box (i dont need it, its tight,)

Enjoy a send me a pic of your version. Thanks. Any suggestions are welcomed.